Welded Steel Pipe

Honing tube

Steel Hollow Section

Product Series

ASTM A335 P22 Seamless Alloy Steel Pipe

The A335 grade P22 pipe end is available in either a plain end, threaded ending and bevelled ending. The form of A335 P22 welded pipe can be either one of these shapes, for example - square, rectangle, round and hydraulic.

Keywords:

Series:

Steel Pipe

Seamless Steel Pipe

Product Details
My Inquiry
Series Products

WhatsApp: +8613061089951 E-Mail: Michelle@aitongmetal.com

Series Related

I want inquiry

Product Detail Technical Packaging

Product introduction

Product Description

ASTM A335 P22 is the part of ASTM A335. ASTM A335 P22 alloy steel pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.

Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.

The range of ASTM A335 P22 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.

The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

Outer Dimensions: 19.05mm – 114.3mm
Wall Thickness: 2.0mm – 14 mm
Length: max 16000mm

Steel grade: ASTM A335 P22

Packing:

Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.

Inspection and Test:

Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.

Surface treatment:

Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.Mechanical properties for ASTM A335 P11

Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.Material & Manufacture

Heat Treatment

A / N+T
N+T / Q+T
N+T

Mechanical Tests Specified

Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.

Notes for Bend Test:

For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

Related informations :

European Standards for steel
ASTM Standards for steel pipes
JIS Seamless Pipe
Tubes for Mechanical and Automobile
ASTM A335 Pipe Specifications
ASTM A333 Pipe Specifications
ASTM A213M-09 Standard Specication
How to packing the seamless pipe
Tubes in small calibers for boilers and petro chemical industry

Technical data

ASTM A335 P22 Chemical Composition

C, %	Mn, %	P, %	S, %	Si, %	Cr, %	Mo, %
0.015 max	0.30-0.61	0.025 max	0.025 max	0.50 max	1.90-2.60	0.87-1.13

ASTM A335 P22 Properties

Tensile Strength, MPa	Yield Strength, MPa	Elongation, %
415 min	205 min	30 min

ASTM A335 Gr P22 Equivalent Material

ASTM	ASME	Equivalent material	JIS G 3458	UNS	BS	DIN	ISO	ABS	NK	LRS
A335 P22	SA335 P22	T22, 10CrMo910, 10CrMo9-10, 1.7380, 11CrMo9-10, 1.7383	STPA 24	K21590	3604 P1 622	17175 10CrMo910	2604 II TS34	ABS 13	KSTPA 24	Sec 2 2-1/4Cr1Mo410

Packaging

The company's products are packaged and labeled according to regulations and customer requirements. Take care to avoid any damage that may occur during storage or transportation. In addition, clear labels are attached outside the package to facilitate identification of product ID and quality information.

1. Wooden case packing, PVC packing, etc.

2. Standard seaworthy packing machine customized

3. Port any port in China

In order to better ensure the safety of your goods, we will provide professional, environmentally friendly, convenient and efficient packaging services.

Stainless steel pipes are often packed and transported in bags, boxes or protective containers. Stainless steel conduits with an outer diameter greater than 6 inches can be transported in bulk, packed or not. The length, outer diameter, wall thickness, finish and transportation method determine the optimal packaging method. Most polishing tubes are packed in wooden cases or boxes made of other suitable materials.

It is necessary to bundle stainless steel pipes, because excessive quantities of stainless steel pipes during transportation may lead to risks such as bending, extrusion deformation or twisting of pipes during transportation. In addition, some other auxiliary measures need to be taken during baling. Flat steel wire belt is generally used for binding, but other suitable materials can also be used. The number of fixed knots depends on the length and weight of the bale.

Application

1 Building Materials industry
2 light industry
3 Shipbuilding Industry
4 Mechanical Manufacturing
5 Bridge Construction
6 Energy Engineering
7 Water Conservancy Projects
8 Chemical Industry

1. Automobile industry

Stainless steel plate not only has high corrosion resistance, but also has light weight, which is very important in automobile manufacturing. A large number of stainless steel plates are required for the manufacturing of automobile shells, and many international famous cars are now beginning to use stainless steel plates as the structural materials of automobiles. Even in high-speed railway, subway and other aspects, stainless steel plate is also widely used.

2. Water storage and transportation

Water has high requirements on the environment during storage. Stainless steel plate can effectively ensure the water quality is not polluted when used for water storage. Stainless steel plate is also recognized as a safe, hygienic and efficient water storage material in the world. Stainless steel plate will also be an indispensable material for water storage equipment in the future.

3. Construction industry

In fact, stainless steel plates were first used in the construction industry, and then gradually introduced into more fields. Decorative panels on the exterior walls of buildings are generally made of stainless steel plates, which are durable and beautiful.

In a word, stainless steel plates are widely used. In addition to the above, stainless steel plates can also be seen in the household appliance manufacturing industry. I hope you can have a more comprehensive understanding of stainless steel plate after reading this article. More wonderful content, remember to pay attention to TISCO stainless steel!

Steel square tube is a welded structural product with an internal weld seam that has a variety of industrial, commercial, residential and ornamental uses. Depending on the size you need, we stock it in A513 or A500 Grade B.

FAQ